1.) Turn on the projector by using the remote that looks like this

2.) Open ProPresenter and selected content should appear on the screen

1.) Turn on the projector with the remote that looks like this

2.) On the top bar of the computer screen, click the small TV icon. A drop down will appear and click ‘Mirror Displays.’ You should now see what you are doing on the computer, being displayed on the screen.

1.) Power on the AV rack by using the button. Be sure to turn this switch off when finished.

2.) Use the knobs to adjust appropriate source of audio. Make sure the master is set at the level labeled ‘0’. Be sure to power on the desired microphone via the microphone.

1.) Click the Vista icon located on the dock

2.) If the ‘Vista’ program is not there, Click ‘Finder’ on the bottom left corner of the dock

3.) Click ‘Applications’ and scroll till the bottom until you see a program called ‘Vista’. Double click to open.

4.) Once the program opens, click ‘Open ST SM Room’

5.) Use the controller to select the desired scenes

1.) If the labels happened to fall off of the lighting controller, below is which buttons trigger which scenes.

South Toledo Lighting Controller

1.) Power on the AV rack by using the button. Be sure to turn this switch off when finished.

2.) Turn on the box labeled ‘CCTV’ (If not already on)

3.) Press the button next to the display that’s labeled ‘standby’

4.) Using the projector remote, switch the source to ‘analog PC” by pressing the input button

5.) Use the knobs to adjust appropriate source of audio. Make sure the master is set at the level labeled ‘0’.